2022 GT-R World Cup Driver Registration

This is for cars running a DCT (Dual Clutch Transmission) only. Any car equipped with a DCT from the factory is allowed to compete in this class so long each of the following requirements are met:

• Vehicle must have come from factory with a DCT transmission.
• Must have full interior with functioning stereo, A/C and all factory glass. Power windows must work. Aftermarket seats are permitted.
• Must have all body panels. Carbon hood, roof or trunk are permitted.
• Must have all factory lights.
• Must run factory sized brakes.
• Any 17” or larger wheel may be used.*
• Max tire diameter allowed is 28”.
• Must have factory pickup locations for suspension.
• Methanol and or nitrous are not allowed.**
• There is no turbo limitation or mounting limitation for any car other than 2009+ R35 GT-Rs.
• 2009+ R35 GT-Rs must run a turbo system using the stock manifold and a factory 2-bolt compressor cover. 2020 Model year GT-Rs are allowed to use their OEM manifold and turbo housing with an upgraded turbo as long as that turbo carries the OEM 2-bolt compressor cover.

The top 8 cars based on ET in qualifying will form the Elite 8 and there will be no breakout. Cars 9-40 will form the next bracket. The quickest ET of the #9 qualifying car will form the index for the second class. If any car in the second class goes .151 seconds quicker than index during eliminations, they are disqualified. Sportsman tree and courtesy staging will apply in this class.

* Audi RS3s may run smaller brakes and use a 15" wheel. Tire rules still apply.
** Traditional single nozzle charge pipe installed methanol injection systems are allowed (Snow Performance, Aquamist, AEM, etc.)

This class is for cars running a DCT (Dual Clutch Transmission) only. This class is targeted at cars more race equipped using a DCT transmission. Any car equipped with a DCT from the factory is allowed to compete in this class so long each of the following requirements are met:

• Any 15” or larger wheel may be used.
• Max tire diameter allowed is 28”.
• 10.5W max tire width.
• Must have factory pickup location for suspension.
• Methanol and or nitrous are not allowed.*
• No turbo limitations for any car other than the 2009+ R35 GT-R.
• 2009+ R35 GT-Rs may run any turbo system and location as long as it has a compressor wheel inducer limit of 58mm.
• ENGINE AND TRANSMISSION DIAPERS ARE REQUIRED.

Turbocharger size will be verified by one or both of the following methods: (1) By measuring the housing bore at the leading edge of the impeller wheel. The maximum diameter of the housing bore at the leading edge of the impeller wheel may not exceed 2mm more than the maximum allowable turbocharger size permitted in this class. (2) By measuring the impeller inducer wheel where the leading edge of the inducer wheel meets the housing. The wheel/blade contour from the inducer to the exducer must be continuous without steps.

* Traditional single nozzle charge pipe installed methanol injection systems are allowed (Snow Performance, Aquamist, AEM, etc.)

This is for R35 GT-Rs only and must use the VR38 engine and GR6 transmission. Each of the following requirements must be met:

• Using up to 68mm aftermarket stock location turbo kits.
• This class carries a minimum weight requirement of 3650lbs with driver.
• GT-Rs in this class will typically run mid 7s to low 8s in the 1/4 mile.
• Nitrous is not allowed.
• Requires a turbo compressor wheel inducer limit of 68mm.
• 15” wheels are allowed as well as slicks that do not exceed 28” in diameter.
• ENGINE AND TRANSMISSION DIAPERS ARE REQUIRED.

Turbocharger size will be verified by one or both of the following methods: (1) By measuring the housing bore at the leading edge of the impeller wheel. The maximum diameter of the housing bore at the leading edge of the impeller wheel may not exceed 2mm more than the maximum allowable turbocharger size permitted in this class. (2) By measuring the impeller inducer wheel where the leading edge of the inducer wheel meets the housing. The wheel/blade contour from the inducer to the exducer must be continuous without steps.

This is for R35 GT-Rs only and must use the VR38 engine and GR6 transmission. Each of the following requirements must be met:

• Using a turbo larger than 68mm and a GR6 transmission.
• Any turbo location is allowed.
• GT-Rs in this class will typically run very low 7s to high 6s in the 1/4 mile.
• This class carries no weight, tire or fuel limitations.
• ENGINE AND TRANSMISSION DIAPERS ARE REQUIRED.

This is a no holds barred GT-R class with a 8 car maximum field. Each of the following requirements must be met:

• Any R32, R33, R34 or R35 is allowed to compete.
• This class requires a GT-R Specific engine from any year (RB or VR based).
• RWD and AWD GT-Rs are allowed to compete.
• This class carries no transmission, weight, tire or fuel limitations.
• ENGINE AND TRANSMISSION DIAPERS ARE REQUIRED.